SC3-LARGO
CompactPCI® Serial CPU Card
Powerful 5th Generation Intel® Core™ i7 Mobile Processor
Quad-Core • Up to 24GB DDR3L ECC Memory
The SC3-LARGO is a rich featured high performance 4HP/3U CompactPCI® Serial CPU board,
equipped with a 5th generation Intel® Core™ mobile processor (Broadwell H quad-core).
The SC3-LARGO front panel is provided with two Gigabit Ethernet jacks,
two USB 3.0 receptacles, and two mDP connectors, compliant with the
DisplayPort 1.2 standard for Multi-Stream-Transport (MST).
Local expansion mezzanine cards are available for additional I/O.
|
|
The SC3-LARGO is equipped with up to 24GB Low Power RAM with ECC support.
Up to 8GB memory-down are provided for rugged applications, and another 16GB maximum are
available via the DDR3 ECC SO-DIMM socket. The on-board SATA 6G RAID
controller allows for powerful mass storage solutions via the CompactPCI®
Serial backplane. Low profile SSD mezzanine modules are available as on-board
storage solution, in addition.
|
|
SC3-LARGO • 5th Generation Intel® Core™ Processor
|
The SC3-LARGO is equipped with a set of local expansion interface connectors,
which can be optionally used to attach a mezzanine side board. A variety of
expansion cards is available, e.g. providing legacy I/O and additional PCI Express®
based I/O controllers such as SATA, USB 3.0 and Gigabit Ethernet, and also a third video
output.
|
|
Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
Typically, the SC3-LARGO and the related side card would come as a
readily assembled 8HP unit. As an alternate, MicroSATA or mSATA SSD
based low profile mezzanine mass-storage modules are available that
fit into the SC3-LARGO 4HP envelope.
|
|
Feature Summary
|
General
- CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O connectors for typical system configuration (2 x USB3, 2 x Mini DisplayPort, 2 x GbE)
- Backplane communication via PCI Express® Gen3, 6x SATA 6G, 1x SATA 3G, USB 3.0, Gigabit Ethernet
- Local mezzanine expansion option (side card), COTS and custom specific boards
- Heat spreader available for
CoolConduct® technology heat exchanger systems (option)
|
Processor
- 5th Generation Intel® Core™ CPU (Broadwell H)
- i7-5850EQ • 4 Cores • 2.7GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT3e-6200 Intel® Iris™ Pro graphics 1GHz • 6MB LLC • vPRO™/AMT
- i7-5700EQ • 4 Cores • 2.6GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT2-5600 Intel® HD graphics 1GHz • 6MB LLC • vPRO™/AMT
|
Firmware
- Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
- Fully customizable by EKF
- Secure Boot and
Measured Boot supported - meeting all demands as specified by
Microsoft®
- Windows®, Linux and other (RT)OS' supported
- Intel® AMT supported (disabled by default, must be enabled via BIOS setup)
* CSM (Compatibility Support Module) emulates a legacy BIOS environment,
which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'
|
Main Memory
- Integrated memory controller up to 24GB DDR3L 1600 +ECC
- DDR3L +ECC soldered memory up to 8GB
- DDR3L +ECC SO-DIMM memory module socket up to 16GB
|
Performance Rating
- Passmark 8.0 performance test (Windows 8.1/64, 16GB RAM, C47-MSATA mezzanine SSD storage module)
- SC3-630D (i7-5700EQ): Passmark rating 2975, CPU rating 8620
- SC3-830D (i7-5850EQ): Passmark rating 3271, CPU rating 9167
|
Graphics
- Integrated HD Graphics Engine, 3 symmetric independent displays
- 3D HW acceleration DX11.1, OpenCL 1.2, OpenGL 4.3, ES 2.0
- HW media acceleration DXVA 2, VAAPI
- HW video decode H264, SVC, AVC, MVC, MPEG-2, MJPEG, JPEG large frame support, VC-1, VP8
- HW video encode H264, SVC, AVC, MVC, MPEG-2
- Content protection PUMA, PAVP, HDCP
- Front panel options: Dual Mini-DisplayPort (mDP) or single VGA connector
- 3rd DisplayPort connector via mezzanine side card
- DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
- Max Resolution 4096 x 2304 @60Hz (any DisplayPort), 1920 x 1200 (VGA)
- 4k x 2k @24Hz supported for Blu-ray playback
- Integrated audio
|
Networking
- Up to 4 networking interfaces in total - 2 x front RJ45 GbE, 2 x backplane GbE via P6
- 1000BASE-T, 100BASE-TX, 10BASE-T connections
- Front port 1 - I217LM with Intel® AMT support
- Front port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHY
- Front port option M12 X-coded connectors (replacement for RJ45, requires 8HP front panel width)
- IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
- IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
- IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
- Backplane Gigabit Ethernet w. 2 x I210-IT NIC
|
Chipset
- Intel® QM87 Lynx Point Platform Controller Hub (PCH)
- 8 x PCIe Gen2 5GT/s
- 4 x SATA 6G, 2 x SATA 3G
- 10 x USB2, 4 x USB3
- LPC, Audio, Legacy
|
On-Board Building Blocks
- Additional on-board devices, PCIe® based
- 3 x Gigabit Ethernet controllers Intel® I210IT
- 1 x Gigabit Ethernet PHY Intel® I217LM
- IEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signals
- PCIe Gen2 packet switch 16-lane 16-port PLX PEX8618
- SATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offload
|
Security
- Trusted Platform Module
- TPM 2.0 for highest level of certified platform protection
- Infineon Optiga™ SLB 9665 cryptographic processor
- Conforming to TCG 2.0 specification
- AES hardware acceleration support by 5th Gen processor series (Intel® AES-NI)
|
Front Panel I/O (4HP)
- 2 x Gigabit Ethernet RJ45 (1 = PCH & I217LM - iAMT, 2 = I210IT)
- 2 x DisplayPort (from processor integrated HD graphics engine, mDP style receptacles, optional cable connector retainer available)
- 2 x USB 3.0
|
CompactPCI® Serial Backplane Resources
- PICMG® CPCI-S.0 CPU card & system slot controller
- 16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Core™ CPU
- 6 x PCIe Gen2 5GT/s (6 links x 1 for peripheral slots)
- 2x SATA 6G & 1x SATA 3G (from QM87 PCH)
- 4 x SATA 6G (Marvell hardware RAID controller)
- 4 x USB2, 2 x USB3 (from PCH)
- 2 x Gigabit Ethernet (I210IT networking controllers)
|
Local Expansion and Mass Storage Solutions
- Mezzanine side card connectors for local expansion
- P-EXP - USB 2.0 & Legacy (from PCH)
- P-DP3 - 3rd DisplayPort video (from Intel® Core™ CPU)
- P-HSE - 2 x SATA 6G, 1 x SATA 3G & 4 x USB 2.0 (from PCH)
- P-PCIE - PCIe Gen2 5GT/s 1 link x 4 lanes (from on-board PCIe® switch)
- 4HP Low profile mezzanine module options
- CFast™ Card with C41-CFAST mezzanine module
- SATA 1.8-Inch Solid State Drive with C42-SATA mezzanine module
- Dual mSATA SSD with C47-MSATA mezzanine module
- Triple M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine module
- Custom specific module design
- 8HP/12HP Mezzanine side card options
- SCS-TRUMPET - 3rd DisplayPort F/P connector, RS-232, 2 x USB3, on-board 2.5-Inch SATA SSD or 2 x M.2/NGFF SATA SSD module sockets 2230 - 2280
- Variety of other side cards available
- Custom specific side card design
|
Environmental & Regulatory
- Suitable e.g. for industrial, transportation & instrumentation applications
- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution
- Coating, sealing, underfilling on request
- Lifetime application support
- RoHS compliant
- Operating temperature 0°C to +70°C
- Operating temperature -40°C to +85°C (industrial temperature range) on request
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 11.7 years (SC3-680D)
- EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
RT OS Board Support Packages & Driver
- LynxOS - on request
- On Time RTOS-32 - on request
- OS-9 - on request
- QNX
- Real-Time Linux (RT Patch) - on request
- RTX - on request
- VxWorks 5.5 & 6.9 - on request
- VxWorks 7.0 - under development
- Others - on request
|
all items are subject to change w/o further notice
|
While mechanically compliant to CompactPCI® Classic, CompactPCI® Serial
(PICMG® CPCIS.0) defines a completely new card slot, based on PCI Express®,
SATA, Gigabit Ethernet and USB serial data lines. Up to 6 high-speed
backplane connectors P1 - P6 are provided on a system slot controller
such as the SC3-LARGO, which can be considered as a root hub with
respect to most signal lines. A passive backplane is used for distribution
of a defined subset of I/O channels from the system slot to each of up
to eight peripheral slots in a CompactPCI® Serial system.
|
|
Most CompactPCI® Serial peripheral slot cards require only the backplane
connector P1, which comprises PCIe, SATA and USB signals, resulting in a
concise and inexpensive peripheral board design. More powerful peripheral
cards profit from so called Fat Pipe slots (PCIe x 8).
The SC3-LARGO is a native CompactPCI® Serial CPU card, suitable for
usage in a pure CPCI Serial environment. Due to its generous backplane
capabilities (22 x PCI Express® lanes, 6 x USB, 7 x SATA RAID, 2 x GbE),
very powerful industrial systems can be built.
|
|
SC3-LARGO with C48-M2 Dual SATA SSD Storage Module
|
|
SC3-LARGO • Simplified Block Diagram
|
|
SC3-LARGO w. SCS-TRUMPET Mezzanine Side Card 8HP Assembly
|
|
SC3-LARGO w.
CoolConduct®
Heat Spreader for Multiprocessing Systems
|
|
|
Ordering Information |
Please refer to
List 21
for popular SC3-LARGO SKUs
For popular mezzanine side cards please refer to
List 20
|
|
